Effect of Thermal barrier coating with different Thickness in Piston to enhance Temperature distribution

Sujeet Kumar, Anurag Bagri, Vinay Kumar Yadav

Page No: 11-20

DOI: 10.86493/VEREDAS.2023/V13I10/02

In the current work, the CAD model of pistonhas been developed by using ANSYS design modeler. The model has been simulated using ANSYS software on steady state thermal and static structural domain 15.0 workbench in order to observe various parameters effecting the temperature distribution between different thickness of thermal barrier coating. Four types of configurations of coating thickness were used i.e. 0.5, 0.7, 0.9, 1.2 mm. An optimized model of pistonhas been developed as stated configurations of coated piston. The simulations have been performed at a standard temperature that is the temperature generated during working of internal combustion engine. The simulation of the optimized model gives lower value of temperature distribution, thermal stress and deformation. The results are validated with reported existing previous work. The configuration of thickness between 0.7 to 0.9 of thermal barrier coating coated with sodium stannate material exhibits higher temperature distribution compared to titanium dioxide, zirconium and Ai - Si.

Citations

APA: Sujeet Kumar, Anurag Bagri, Vinay Kumar Yadav (2025). Effect of Thermal barrier coating with different Thickness in Piston to enhance Temperature distribution. DOI: 10.86493/VEREDAS.2023/V13I10/02

AMA: Sujeet Kumar, Anurag Bagri, Vinay Kumar Yadav. Effect of Thermal barrier coating with different Thickness in Piston to enhance Temperature distribution. 2025. DOI: 10.86493/VEREDAS.2023/V13I10/02

Chicago: Sujeet Kumar, Anurag Bagri, Vinay Kumar Yadav. "Effect of Thermal barrier coating with different Thickness in Piston to enhance Temperature distribution." Published 2025. DOI: 10.86493/VEREDAS.2023/V13I10/02

IEEE: Sujeet Kumar, Anurag Bagri, Vinay Kumar Yadav, "Effect of Thermal barrier coating with different Thickness in Piston to enhance Temperature distribution," 2025, DOI: 10.86493/VEREDAS.2023/V13I10/02

ISNAD: Sujeet Kumar, Anurag Bagri, Vinay Kumar Yadav. "Effect of Thermal barrier coating with different Thickness in Piston to enhance Temperature distribution." DOI: 10.86493/VEREDAS.2023/V13I10/02

MLA: Sujeet Kumar, Anurag Bagri, Vinay Kumar Yadav. "Effect of Thermal barrier coating with different Thickness in Piston to enhance Temperature distribution." 2025, DOI: 10.86493/VEREDAS.2023/V13I10/02