Conversion procedure of a Traditional Fire Extinguisher to an Automatic Fire Retardant Discharge

In recent years it has been seen that there has been exponential growth in Car fires, and there are not many ways to solve this problem. We are going to manufacture a mechanism that will solve this problem. We are planning to make a mechanism that will be using AFFF FOAM as fire retardants which would be stored in a tank made of aluminum alloy. The mechanism would consist of smoke, infrared, and thermal sensors which will help in detecting the fire near ENGINE. With this kind of mechanism in use, it will help in reducing casualties and the cost of repair of cars caused due to fires while riding the vehicle. There are 3 probable causes of fire. The fire can start when the fuel is being supplied from the fuel tank, as the fuel is coming in high pressure, pumped by the fuel pump to the engine, there are many chances that fuel gets leaked and that leads to fire. The second cause can be electrical wiring. All the cars have a lot of electrical wiring spread all around the car, so it becomes difficult to reach out to every possible place at the time of the fire, and also the rate of these causes is also less. Third can be from coolant failure. If cars are not serviced on time that leads to deterioration of coolant and which in turns leads to increase in temp of car engine while driving. May lead to fire when driving a car at high temperature.